Securitron Power Supply Accessories

Securitron AQ Power Distribution Boards (PDBs) split the primary AC or DC output from a power supply to separate equipment onto individually fused circuits.

The PDB-1R uses an end-of-line resistor to trigger a form "C" contact in response to a fire system alarm condition. In response to the trigger, the unit transfers power from the "Normally On" output to the "Normally Off" output. Additional triggered reactions include status feedback to fire control or annunciation systems, ground fault trigger and input trigger that latches until reset.

Distributed Power Control Interface for Fire, Access, HVAC, Elevator, and Security. The PDB-8C1R /8F1R power distribution control interface converts a main non-power limited DC power source to 8 power-limited outputs that can be controlled by a Fire Alarm Control Panel. Each output can be selectively set to turn ON or to Turn OFF when triggered by the panel.

The PDB-8F8R / 8C8R is a versatile, compact way to distribute and control power for Access Control Systems with Fire Alarm Interface. This Access Control board is an 8 position power distribution board with individual relays with input control for each output.

The CCB-8 expansion board is used to add 8 additional Class 2 polyswitch 2A output breakers to BPS Series power supplies larger than 1 Amp Slide switches connect or disconnect load from power, and LEDs monitor zone status (voltage, no voltage).

The FAR module is designed to work in conjunction with the Securitron® BPS and BPSM series power supplies and a fire alarm panel. When the FAR receives a signal from the fire alarm it will switch off the output of the BPS/BPSM power supply. The power supply will stay in this mode until a manual reset is instituted by turning the key switch mounted in the face of the FAR module. This feature is required in certain jurisdictions to prevent the access control system from automatically (when the fire alarm is reset) relocking doors during an evacuation.

The BR-4 Bridge Rectifier converts an AC input to full wave rectified DC output, with a maximum 4 Amp capacity.

CKL Cabinet Key Locks fit the standard knockout on all furnished Securitron cabinets, and come with two keys.